Raise3D
Raise3D E2
Desktop 3D printer, dual extruders
Desktop printer with independent dual extruders. Bought here mostly by engineering departments, schools and shops doing small-batch production.
Raise3D · Raise3D E2
Specifications
Manufacturer specifications, from the Raise3D E2 Technical Specifications sheet (v3.5, November 2023).
| Print technology | Fused filament fabrication (FFF) |
|---|---|
| Print head system | IDEX independent dual extruders |
| Build volume, single extruder | 330 x 240 x 240 mm |
| Build volume, dual extruder | 295 x 240 x 240 mm |
| Layer height | 0.1 - 0.5 mm |
| Nozzle diameter | 0.4 mm standard; 0.6 and 0.8 mm available |
| Maximum nozzle temperature | 300 °C |
| Maximum build plate temperature | 110 °C |
| Build plate | Flexible steel plate with BuildTak, silicone heated bed |
| Build plate levelling | Mesh levelling with flatness detection |
| Filament diameter | 1.75 mm |
| Materials | PLA, ABS, ASA, PETG, PC, PETG ESD, TPU 95A, PVA+ |
| Print head travel speed | 15 - 150 mm/s |
| Filament run-out sensor | Fitted |
| Air filtration | HEPA filter with activated charcoal |
| Connectivity | Wi-Fi, LAN, USB, live camera |
| Interface | 7-inch touchscreen |
| Noise | Under 50 dB(A) while printing |
| Machine size | 607 x 596 x 465 mm |
| Weight | 35.1 kg net |
| Power | 100-240 V AC, 50/60 Hz |
| Certifications | CB, CE, FCC, RoHS, RCM |
This is not the whole sheet. Tell us the material and thickness you run and we will send the full manufacturer specifications for the Raise3D E2.
Ask for the spec sheetWhat comes with it
| We install and commission | We deliver, position, align and prove the machine on your material, on your floor. |
|---|---|
| We train your operator | Hands-on training for your people, on the parts they will actually run. |
| We visit on schedule | Scheduled maintenance visits, so wear is found before it stops the line. |
| We hold parts in Makati | Lenses, nozzles, filters, belts and tooling are stocked here, not ordered from abroad when you call. |
| We diagnose before we drive | Faults are triaged with you over Viber first, so a technician arrives knowing the problem. |
More 3d printing & scanning
What customers say
Read all testimonials →Batangas State University
Shewak's Engravables Inc.
Form ATI-QR-01 · request for quotation
Ask about the Raise3D E2
Tell us what you can - the material, the size, the thickness. Still deciding? Say that instead and an engineer will work it through with you.